Slow and Noisy Door Operation is a very common problem for both home and commercial use. Many people are embarrassed or even terrified when this problem occurs, mostly because they cannot understand why it happens to them or why anyone would want to do such a thing. The truth is that this is not as uncommon as you may think. It is often caused by a simple configuration error in the door’s operation, an air leak, or possibly just poor maintenance. Whatever the cause, the fact of the matter is that if you’re experiencing Slow and Noisy Door Operation it is time to take action to correct the issue.
Let’s start with a very basic explanation of what Slow and Noisy Door Operation is all about. Doors used in homes often operate at a very high speed. This means that there is a constant drumbeat of air rushing through the door. This is not only loud and irritating when the door is opened and shut, but it is also dangerous and can lead to a serious injury or even death if the door sustains damage. Air leaks often appear when the door is being operated in an up and down motion. If the door has excess moisture, then the noise will be even worse.
All of these conditions are potential causes of the noise that is heard when operating doors. But there is one more factor that you should definitely be aware of. This is the possibility that the noise is actually caused by the motor itself. If the door motor is old or otherwise not functioning properly, then the noise may be the result.
So, let’s talk about how to fix this problem. One common solution is to replace the door motor. While this can often solve the issue, it’s often only a temporary fix. In many cases, the motor will have to be replaced from the beginning, because it is the very thing that causes the noise to occur in the first place.
The first step in replacing the motor is to check the circuit breaker for a fuse. This is especially important if the problem is electrical. You don’t want to take any chances with your electrical equipment. If you don’t know if the breaker is used for this type of door, then you can easily ask for assistance. You should also avoid opening the door until the problem is resolved.
Next, you’ll need to open up the door to see which part needs to be replaced. Many people just open the door and try to repair it themselves. It’s usually best to get a technician to work on it. A general rule of thumb is to replace the door motor if you hear noise. On some doors, this is as easy as removing the old motor and putting in a new one. However, most will need to be disassembled before new is installed.
It’s very important to find out why the door is acting slow and noisier. One of the most common reasons is a worn or damaged spring, which will need to be replaced. Another reason is a worn or broken contact seal between the track and the door. These can both be fixed. Sometimes, the issue is with the motor itself. If this is the case, then you must replace the entire unit.
If none of these things are the problem, then it’s possible that the motor has failed. This is a much more serious issue and requires a special technician. You may have to replace the entire door, not just the motor, in this case. This is why it’s a good idea to call in a pro before attempting to perform this type of door operation repair on your own.